[email protected]

Capillary Transition Zones from a Core Analysis

The capillary transition zone in a reservoir containing oil and water is located between the oil-water contact and the level where irreducible water is present. In low permeability reservoirs or in situations where the oil and water densities are similar, the transition zone can be extended to cover a vertical distance up to around a hundred meters As the water saturation varies with the 2009-10-21 Integration of core capillary pressure Oct 21, 2009 · Capillary Pressure (in height) c 0% Water Saturation 100% Irriducible (S ) wirr Mobile Water} P (Pore Entry Pressure) ce Oil/Water Transition Zone Reservoir at S wirr Free Water Level Zero Capillary Pressure Oil/Water Contact Top Transition Zone Relations of a single accumulation to capillary type curve. Schematic relations of multiple

A comprehensive review on characterization and modeling

Dec 01, 2016 · The capillary transition zone of carbonate reservoir is traditionally defined as the reservoir interval that extends from the oil-water contact (OWC) up to the reservoir level where water saturation reaches its irreducible level, Swirr as shown in Fig. 1.The transition zone, therefore, may vary in thickness from a few feet in high permeability reservoirs to over hundreds of feet in some low Capillary pressure and relative permeability correlations Aug 20, 2017 · The capillary transition zone is referred to a reservoir interval from the oilwater contact (OWC) up straight to the height where water saturation reaches its irreducible condition, Swir (Bera and Belhaj 2016; Masalmeh et al. 2007; Nono et al. 2014). The thickness of a capillary transition zone may vary from a few feet in high-permeability reservoirs to more than 300 feet in low-permeability Capillary-based method for rock typing in transition zone Nov 30, 2018 · This study includes the observed variations in terms of water saturation data versus depth and how to assign rock types to the transition zone grids. The objective of the capillary-based method is to produce a water saturation map which honors laboratory data as well as the well log data and considers the depth so that it can handle the transition zone in a proper manner.

Chapter3

  • Eions For Capillary Pressure Under Static ConditionsApplications of Capillary Pressure Eionsin Porous MediaLaboratory Methods of Measuring CapillarypressureOther Methods3.1.1Pc In terms of radius of capillarytube
    Sincethe interface is in equilibrium, force can be balanced on any segment. Theinterfacial forces are eliminated by taking as a free body, that part of theinterface not in direct contact with the solid. A force balance would give:(Internalpressure - External pressure) * Cross-sectional area = Interfacial tension * 3.1.2Pc In terms of height of fluid column.
    becausethere is nocapillary pressure across a horizontal interface. but therefore, Sincethen Oil-water system becauseno capillary exists across any interface that is horizontal. Since , then, Therefore, Thatis, Thetwo eions for capillary pressure in a tube, one in terms of height of afluid column and the oth3.1.3Pc In terms of radii of curvature ofinterface
    Thedependence of on the curvature ofthe interface is analyzed with reference to the figure below. This figurerepresents a small segment of a curved interface containing the point p. Thepoint is at the center of the segment, which is approximately square in shape.The edges of the segment are each of length . ThInvestigations on the relationship among the porosity May 21, 2021 · The capillary transition zones of carbonate reservoirs are traditionally defined as the reservoir interval that extends from the oil-water contact up to the reservoir level where water saturation reaches its irreducible level. Crain's Petrophysical Handbook Capillary Pressure -- PcCapillary pressure measured in the laboratory can be performed using air-brine or mercury injection (MICP) methods. The later is usually used in poorer quality reservoirs. The pressures involved are quite different so the graphs from the two methods are difficult to compare directly. Crain's Petrophysical Handbook Permeability BasicsPermeability of a rock for oil, gas, or water is a function of the absolute permeability and the viscosity of the fluid. Productivity describes the flow rate of oil or gas into the well bore. These two terms are obviously related. This Chapter explains how to determine these values from open hole log data.

    Method of applying capillary pressure data to calculate

    The analysis of transition zones (TZs) using Goda (Sam) et al.s empirical capillary pressure from well logs and 3D seismic data in Stephs field, Niger Delta, was carried out to remove the Capillary Transition Zones from a Core Analysis PerspectiveThe analysis of transition zones (TZs) using Goda (Sam) et al.s empirical capillary pressure from well logs and 3D seismic data in Stephs field, Niger Delta, was carried out to remove the